DWP-ENC / Digital position / incremental & absolute

Draw-Wire Encoders

Match cable travel to your PLC: incremental ABZ pulses or an absolute position value over an agreed industrial interface.

100–15,000 mm3.937–590.551 in

Configure your RFQ

Cable extension turns a spring-return drum coupled to a potentiometer or encoder. — Measurement principle · concept illustration

STROKE × SIGNAL × LINEARITY

Confirm the measurement envelope.

Selection envelopes · model-specific confirmation required
Model	Measuring stroke / mm & inch	Linearity target	Signal output	Wire rope option	Comparison reference
DWP-ENC	100–15,000 mm 3.937–590.551 in	±0.05% FS target	ABZ HTL / TTL · RS485 · CANopen · SSI	Ø0.6–1.0 mm SS316 option	SICK BTF08 / BTF13; Kübler; wireSENSOR

Family ranges are selection envelopes. Output availability, linearity, cable construction, drawings and delivery are confirmed for the quoted configuration.

PROFINET, EtherCAT and J1939 are requested interface options. Confirm the exact available encoder and device description before ordering.

BEFORE THE MODEL IS FIXED

Four checks for DWP-ENC integration.

Forklift masts, scissor lifts, storage cranes and press positioning require a sensor configuration matched to the actual machine and measurement task.

01HTL supply and input thresholds or 5 V TTL compatibility
02Counts per revolution × drum circumference × quadrature decoding
03Absolute single-turn / multi-turn range and power-loss behavior
04CANopen EDS, J1939 PGNs, SSI format or Modbus register map

DWP-ENC / QUOTATION + ACCESSORIES

Build the sensing package around your machine.

Request the model drawing, cable exit layout and proposed interface with your quotation. Accessory prices below are indicative planning additions, confirmed in the written quote.

Readout, routing & installation options

Indicative additions for quotation planning. Confirm compatibility and final price with the selected sensor.

Pre-scaled digital position readoutMatched analog / pulse input · mm / inch · alarm relays; fieldbus review separately+$17590° stainless steel deflection pulleyReview cable alignment, bend radius and mounting+$48Cable exit wiper & anti-icing bellowsOutdoor protection configuration review+$35Magnetic mount + 2 m extension cableTemporary fixture review; joint stays outside outlet, wiper and pulley+$55

Extension joints must stay outside the sensor outlet, wiper and pulley. An extension cable does not increase calibrated stroke. Panel relay outputs require machine-specific control validation.

DWP-ENC

Send your measurement requirements

Full nameCompany emailCompanyRequired measuring strokeRequired output signalReadout & accessory scopeRequired quantityDelivery country

Exact stroke, application & replacement part number

By submitting, you ask DWP to contact you about this request. Privacy policy. Email drawings to [email protected].

Related stroke and interface decisions

Resolution, linearity and repeatability Review an existing part number

Confirm the measurement envelope.

Selection envelopes · model-specific confirmation required
Model	Measuring stroke / mm & inch	Linearity target	Signal output	Wire rope option	Comparison reference
DWP-ENC	100–15,000 mm 3.937–590.551 in	±0.05% FS target	ABZ HTL / TTL · RS485 · CANopen · SSI	Ø0.6–1.0 mm SS316 option	SICK BTF08 / BTF13; Kübler; wireSENSOR

Family ranges are selection envelopes. Output availability, linearity, cable construction, drawings and delivery are confirmed for the quoted configuration.

PROFINET, EtherCAT and J1939 are requested interface options. Confirm the exact available encoder and device description before ordering.

Build the sensing package around your machine.

Request the model drawing, cable exit layout and proposed interface with your quotation. Accessory prices below are indicative planning additions, confirmed in the written quote.